Welcome Guest 
メインメニュー
ご注文はうさぎですか?
TVアニメ「ご注文はうさぎですか?」公式サイト
アイドルマスター シンデレラガールズ
TVアニメ「アイドルマスター シンデレラガールズ」オフィシャルサイト
俺がお嬢様学校に「庶民サンプル」としてゲッツされた件
TVアニメ『俺がお嬢様学校に「庶民サンプル」としてゲッツされた件』公式サイト
ゆるゆり
アニメ「ゆるゆり」スペシャルサイト
落第騎士の英雄譚
TVアニメ 落第騎士の英雄譚 公式サイト
てーきゅう
TVアニメ「てーきゅう」
Free!-Eternal Summer-
TVアニメ『Free!』公式サイト
星刻の竜騎士
TVアニメーション「星刻の竜騎士」オフィシャルサイト
中二病でも恋がしたい!戀
TVアニメ『中二病でも恋がしたい!戀』公式サイト
そにアニ
そにアニ
境界の彼方
TVアニメ『境界の彼方』公式サイト
通信用語の基礎知識
通信用語の基礎知識
  • カテゴリ ICT、コンピュータ の最新配信
  • RSS
  • RDF
  • ATOM

ブログ - ICT、コンピュータカテゴリのエントリ

iPhone5 買いました

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/6/23 2:03
Apple教に、少しずつ洗脳されている今日この頃、皆さん、お変わりはありませんでしょうか?
先日、私はiPhone5を購入しました。

iPhoneを購入したのは良いのですが、例によって、使いこなしていない私であります。
先日も、電車の時刻表を写真に撮っている話をしたら、時刻表アプリがあるよんって言われる始末。

まぁ、私としては、写真の方が楽なんですが。
単純に、帰宅時に見るだけなので。

写真って言えば、iPhoneで撮った写真って、ファイル名が変えられないんですよね。
フォルダ分けもしたいので、さっそくアプリを導入して、ファイル名を変更/分類毎に分けてみました。
私が使っているのは、 ヒマワリが目印の i写真フォルダ です。
ふむ、これは便利だ。
実は、机のカドにMacBook Airをぶつけて、本体に少し傷がつきました。
ほとんど目立ちませんが、ちょっとブルーな気分に。
周りにいる先人達のMacを見ると、やはり、本体には年季の入った形跡があります。

出来れば綺麗に使いたいので、保護カバーを買ってきました。
私が購入したのは、透明のカバーを本体にはめ込む形式のものです。

名前は「エアージャケット for MacBook Air 13inch (Late 2010)」

http://www.pawasapo.co.jp/products/mac/pmc71.php?category=mac_b

これで、多少ぶつけても、ノープロブレムっす。

ただ気を付ける点が一つ。
自分で、底面にゴム足を付けるんですけど、ただのシールなので、すぐに剥がれる可能性が大です。
瞬間接着剤で付けちゃいましょう。

maillog (2013年3月号)

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/5/7 1:41
Mar 4 20:13:09 fukuchan sm-mta[33951]: r24BD7d3033951: ruleset=check_rcpt, arg1=<jorik.iakubovich@gmail.com>, relay=113-28-55-249.static.imsbiz.com [113.28.55.249] (may be forged), reject=550 5.7.1 <jorik.iakubovich@gmail.com>... Relaying denied. IP name possibly forged [113.28.55.249]
Mar 4 20:13:09 fukuchan sm-mta[33951]: r24BD7d3033951: lost input channel from 113-28-55-249.static.imsbiz.com [113.28.55.249] (may be forged) to IPv4 after rcpt
Mar 4 20:13:09 fukuchan sm-mta[33951]: r24BD7d3033951: from=<admin@so-net.ne.jp>, size=0, class=0, nrcpts=0, proto=ESMTP, daemon=IPv4, relay=113-28-55-249.static.imsbiz.com [113.28.55.249] (may be forged)

Mar 24 17:11:44 fukuchan sm-mta[40714]: r2O8Bg3q040714: ruleset=check_rcpt, arg1=<n.makrris@yahoo.com>, relay=bl15-57-203.dsl.telepac.pt [188.80.57.203], reject=550 5.7.1 <n.makrris@yahoo.com>... Relaying denied. Proper authentication required.
Mar 24 17:11:50 fukuchan sm-mta[40714]: r2O8Bg3q040714: from=<online@chase.com>, size=0, class=0, nrcpts=0, proto=SMTP, daemon=IPv4, relay=bl15-57-203.dsl.telepac.pt [188.80.57.203]


前回のmaillogはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=122

会社のiMacを修理した件

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/4/14 18:25
壊れたまま放置されていた会社のiMacを、修理する事になりました。
銀座のAppleStoreから、そんな遠くない場所なので、タクシーを使って持ち込む事に。

しかし、どでかいiMacを両手に担いで、銀座のAppleStoreに入るには、ちと勇気が必要でした。

故障状況ですが、HDDがだめらしくHDD交換に。
2万円ちょいで、修理完了。
思っていたより安く、安心しました。

実は、コールセンター経由で修理すると、倍以上の料金になったらしいです。
今回は、持ち込んで正解でした。

ここのエレベータって全面ガラスばりで、おしゃれですね。
エレバータ内部のボタンも、「開く」ボタン以外、何もなし?
行きたい階を押す事も出来ない仕組みの様。

各階止まりで、行ったり来たりしている感じ。

なるほろ。そういう考え方もありなエレベータな訳ね。
相変わらず、発想が斬新ですね、Apple。
前回(http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=114)は、5.3をインストールしましたが、今回は、6.3の64bit版です。

訳あって、SELinuxのモードは、permissive modeで。
ハードは、前回と同じく、ThinkPad R61e (7649-3VJ)です。

dmesgを晒します。
ハンパない長さなので、あしからず。

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-279.5.2.el6.x86_64 (mockbuild@c6b10.bsys.dev.centos.org) (gcc version 4.4.6 20120305 (Red Hat 4.4.6-4) (GCC) ) #1 SMP Fri Aug 24 01:07:11 UTC 2012
Command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto  KEYBOARDTYPE=pc KEYTABLE=jp106 rd_LVM_LV=VolGroup/lv_root rd_NO_DM rhgb quiet
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f6d0000 (usable)
 BIOS-e820: 000000001f6d0000 - 000000001f6de000 (ACPI data)
 BIOS-e820: 000000001f6de000 - 000000001f700000 (ACPI NVS)
 BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI present.
SMBIOS version 2.4 @ 0xF6A10
DMI: LENOVO 76493VJ/76493VJ, BIOS 7PETC3WW (2.23 ) 04/12/2010
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1f6d0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 base 01F700000 mask FFFF00000 uncachable
  2 base 01F800000 mask FFF800000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 503MB, range: 1MB, type UC
reg 2, base: 504MB, range: 8MB, type UC
total RAM covered: 503M
Found optimal setting for mtrr clean up
 gran_size: 64K         chunk_size: 16M         num_reg: 3      lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 512MB, type WB
reg 1, base: 503MB, range: 1MB, type UC
reg 2, base: 504MB, range: 8MB, type UC
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000001f6d0000
 0000000000 - 001f600000 page 2M
 001f600000 - 001f6d0000 page 4k
kernel direct mapping tables up to 1f6d0000 @ 8000-b000
RAMDISK: 1e89d000 - 1f6bfa2f
ACPI: RSDP 00000000000f6aa0 00024 (v02 LENOVO)
ACPI: XSDT 000000001f6d2f3c 00084 (v01 LENOVO TP-7P    00002230  LTP 00000000)
ACPI: FACP 000000001f6d3000 000F4 (v03 LENOVO TP-7P    00002230 LNVO 00000001)
ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
ACPI: DSDT 000000001f6d341d 0A7C8 (v01 LENOVO TP-7P    00002230 MSFT 03000000)
ACPI: FACS 000000001f6e5000 00040
ACPI: SSDT 000000001f6d31b4 00269 (v01 LENOVO TP-7P    00002230 MSFT 03000000)
ACPI: ECDT 000000001f6ddbe5 00052 (v01 LENOVO TP-7P    00002230 LNVO 00000001)
ACPI: APIC 000000001f6ddc37 00068 (v01 LENOVO TP-7P    00002230 LNVO 00000001)
ACPI: MCFG 000000001f6ddc9f 0003C (v01 LENOVO TP-7P    00002230 LNVO 00000001)
ACPI: HPET 000000001f6ddcdb 00038 (v01 LENOVO TP-7P    00002230 LNVO 00000001)
ACPI: SLIC 000000001f6dde62 00176 (v01 LENOVO TP-7P    00002230  LTP 00000000)
ACPI: BOOT 000000001f6ddfd8 00028 (v01 LENOVO TP-7P    00002230  LTP 00000001)
ACPI: SSDT 000000001f6e2a6a 0085E (v01 LENOVO TP-7P    00002230 INTL 20050513)
ACPI: SSDT 000000001f6e32c8 0025F (v01 LENOVO TP-7P    00002230 INTL 20050513)
ACPI: SSDT 000000001f6e3527 004F7 (v01 LENOVO TP-7P    00002230 INTL 20050513)
ACPI: SSDT 000000001f6e3a1e 001D8 (v01 LENOVO TP-7P    00002230 INTL 20050513)
ACPI: DMI detected: Lenovo ThinkPad R61
ACPI: Added _OSI(Linux)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000001f6d0000
Bootmem setup node 0 0000000000000000-000000001f6d0000
  NODE_DATA [0000000000009000 - 000000000003cfff]
  bootmap [000000000003d000 -  0000000000040edf] pages 4
(7 early reservations) ==> bootmem [0000000000 - 001f6d0000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
  #2 [0001000000 - 0002012024]    TEXT DATA BSS ==> [0001000000 - 0002012024]
  #3 [001e89d000 - 001f6bfa2f]          RAMDISK ==> [001e89d000 - 001f6bfa2f]
  #4 [000009d800 - 0000100000]    BIOS reserved ==> [000009d800 - 0000100000]
  #5 [0002013000 - 0002013154]              BRK ==> [0002013000 - 0002013154]
  #6 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
found SMP MP-table at [ffff8800000f6ad0] f6ad0
 [ffffea0000000000-ffffea00007fffff] PMD -> [ffff880002600000-ffff880002dfffff] on node 0
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009d
    0: 0x00000100 -> 0x0001f6d0
On node 0 totalpages: 128620
  DMA zone: 56 pages used for memmap
  DMA zone: 102 pages reserved
  DMA zone: 3838 pages, LIFO batch:0
  DMA32 zone: 1704 pages used for memmap
  DMA32 zone: 122920 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 20000000 (gap: 20000000:d0000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880002200000 s94424 r8192 d24360 u1048576
pcpu-alloc: s94424 r8192 d24360 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 126758
Policy zone: DMA32
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=VolGroup/lv_swap SYSFONT=latarcyrheb-sun16   KEYBOARDTYPE=pc KEYTABLE=jp106 rd_LVM_LV=VolGroup/lv_root rd_NO_DM rhgb quiet
PID hash table entries: 2048 (order: 2, 16384 bytes)
Checking aperture...
No AGP bridge found
Memory: 474616k/514880k available (5152k kernel code, 400k absent, 39864k reserved, 7166k data, 1260k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:424
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1862.126 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.25 BogoMIPS (lpj=1862126)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21016 entries in 83 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 1 CPUs
Total of 1 processors activated (3724.25 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2648 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 1f6de000 (139264 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
PCI: MCFG area at f0000000 reserved in E820
PCI: Using MMCONFIG at f0000000 - f3ffffff
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: EC description table is found, configuring boot EC
ACPI: BIOS _OSI(Linux) query honored via DMI
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [PUBS] (on)
ACPI: No dock devices found.
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
pci_root PNP0A08:00: host bridge window [mem 0x20000000-0xfebfffff]
pci 0000:00:02.0: reg 10: [mem 0xf8100000-0xf81fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
pci 0000:00:02.1: reg 10: [mem 0xf8200000-0xf82fffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
pci 0000:00:1a.7: reg 10: [mem 0xfe304800-0xfe304bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xfe100000-0xfe103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x1860-0x187f]
pci 0000:00:1d.1: reg 20: [io  0x1880-0x189f]
pci 0000:00:1d.2: reg 20: [io  0x18a0-0x18bf]
pci 0000:00:1d.7: reg 10: [mem 0xfe304c00-0xfe304fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
pci 0000:00:1f.1: reg 10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io  0x1810-0x181f]
pci 0000:00:1f.2: reg 10: [io  0x1c00-0x1c07]
pci 0000:00:1f.2: reg 14: [io  0x18d4-0x18d7]
pci 0000:00:1f.2: reg 18: [io  0x18d8-0x18df]
pci 0000:00:1f.2: reg 1c: [io  0x18d0-0x18d3]
pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xfe304000-0xfe3047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfe305000-0xfe3050ff]
pci 0000:00:1f.3: reg 20: [io  0x1c20-0x1c3f]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xdc000000-0xddffffff]
pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xfe000000-0xfe00ffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:1c.2:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:15:00.0: reg 10: [mem 0xf8300000-0xf8300fff]
pci 0000:15:00.0: supports D1 D2
pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:15:00.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 15-18] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x20000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
 pci0000:00: Requesting ACPI _OSC control (0x1d)
 pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d3fff disabled]
pnp 00:00: [mem 0x000d8000-0x000d7fff disabled]
pnp 00:00: [mem 0x000dc000-0x000dbfff disabled]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0x1fffffff]
pnp 00:00: [mem 0xfec00000-0xffffffff]
pnp 00:00: [mem 0xfed4c000-0xfed4bfff disabled]
pnp 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x164e-0x164f]
pnp 00:02: [io  0x002e-0x002f]
pnp 00:02: [io  0x1000-0x107f]
pnp 00:02: [io  0x1180-0x11bf]
pnp 00:02: [io  0x0800-0x080f]
pnp 00:02: [io  0x15e0-0x15ef]
pnp 00:02: [io  0x1600-0x165f]
pnp 00:02: [mem 0xf0000000-0xf3ffffff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed14000-0xfed17fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]
pnp 00:02: [mem 0xfed40000-0xfed44fff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0080-0x008f]
pnp 00:04: [io  0x00c0-0x00df]
pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:08: [io  0x0060]
pnp 00:08: [io  0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs IBM3780 PNP0f13 (active)
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x1fffffff] could not be reserved
system 00:00: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:02: [io  0x164e-0x164f] has been reserved
system 00:02: [io  0x1000-0x107f] has been reserved
system 00:02: [io  0x1180-0x11bf] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x15e0-0x15ef] has been reserved
system 00:02: [io  0x1600-0x165f] could not be reserved
system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:02: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
PCI: max bus depth: 2 pci_try_num: 3
pci 0000:00:1c.2: BAR 15: assigned [mem 0x20000000-0x201fffff 64bit pref]
pci 0000:00:1c.2: BAR 13: assigned [io  0x8000-0x8fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfdffffff]
pci 0000:00:1c.0:   bridge window [mem 0xf8000000-0xf80fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.1:   bridge window [mem 0xdc000000-0xddffffff]
pci 0000:00:1c.1:   bridge window [mem 0xdfe00000-0xdfefffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2:   bridge window [io  0x8000-0x8fff]
pci 0000:00:1c.2:   bridge window [mem 0xfe000000-0xfe0fffff]
pci 0000:00:1c.2:   bridge window [mem 0x20000000-0x201fffff 64bit pref]
pci 0000:15:00.0: BAR 15: assigned [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0: BAR 16: assigned [mem 0x24000000-0x27ffffff]
pci 0000:15:00.0: BAR 13: assigned [io  0x4000-0x40ff]
pci 0000:15:00.0: BAR 14: assigned [io  0x4400-0x44ff]
pci 0000:15:00.0: CardBus bridge to [bus 16-17]
pci 0000:15:00.0:   bridge window [io  0x4000-0x40ff]
pci 0000:15:00.0:   bridge window [io  0x4400-0x44ff]
pci 0000:15:00.0:   bridge window [mem 0xf4000000-0xf7ffffff pref]
pci 0000:15:00.0:   bridge window [mem 0x24000000-0x27ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0: PCI bridge to [bus 15-18]
pci 0000:00:1e.0:   bridge window [io  0x4000-0x7fff]
pci 0000:00:1e.0:   bridge window [mem 0xf8300000-0xfbffffff]
pci 0000:00:1e.0:   bridge window [mem 0xf4000000-0xf7ffffff 64bit pref]
  alloc irq_desc for 20 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 21 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 22 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1e.0: enabling device (0005 -> 0007)
pci 0000:00:1e.0: setting latency timer to 64
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0x20000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xfc000000-0xfdffffff]
pci_bus 0000:02: resource 2 [mem 0xf8000000-0xf80fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xdc000000-0xddffffff]
pci_bus 0000:03: resource 2 [mem 0xdfe00000-0xdfefffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe0fffff]
pci_bus 0000:04: resource 2 [mem 0x20000000-0x201fffff 64bit pref]
pci_bus 0000:15: resource 0 [io  0x4000-0x7fff]
pci_bus 0000:15: resource 1 [mem 0xf8300000-0xfbffffff]
pci_bus 0000:15: resource 2 [mem 0xf4000000-0xf7ffffff 64bit pref]
pci_bus 0000:15: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:15: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:15: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:15: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:15: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:15: resource 9 [mem 0x000dc000-0x000dffff]
pci_bus 0000:15: resource 10 [mem 0x20000000-0xfebfffff]
pci_bus 0000:16: resource 0 [io  0x4000-0x40ff]
pci_bus 0000:16: resource 1 [io  0x4400-0x44ff]
pci_bus 0000:16: resource 2 [mem 0xf4000000-0xf7ffffff pref]
pci_bus 0000:16: resource 3 [mem 0x24000000-0x27ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
TCP established hash table entries: 16384 (order: 6, 262144 bytes)
TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
pci 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1a.0: PCI INT A disabled
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.1: power state changed by ACPI to D0
pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1a.1: PCI INT B disabled
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1a.7: power state changed by ACPI to D0
pci 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
pci 0000:00:1a.7: PCI INT C disabled
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: power state changed by ACPI to D0
pci 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1d.0: PCI INT A disabled
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1d.1: PCI INT B disabled
pci 0000:00:1d.2: power state changed by ACPI to D0
pci 0000:00:1d.2: power state changed by ACPI to D0
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.2: PCI INT C disabled
pci 0000:00:1d.7: power state changed by ACPI to D0
pci 0000:00:1d.7: power state changed by ACPI to D0
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1d.7: PCI INT D disabled
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 14474k freed
Simple Boot Flag at 0x35 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1350259147.483:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 955
SELinux:  Registering netfilter hooks
alg: No test for stdrng (krng)
ksign: Installing public key data
Loading keyring
- Added public key E82C5CB35B8516BA
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 24 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 25 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
  alloc irq_desc for 26 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2841 ss_vid 0 ss_did 0
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2843 ss_vid 0 ss_did 0
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
intel_idle: MWAIT substates: 0x1110
intel_idle: does not run on family 6 model 22
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (33 C)
thermal LNXTHERM:02: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (39 C)
ERST: Table is not found!
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
crash memory driver: version 1.1
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input3
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: Battery Slot [BAT0] (battery present)
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe304800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe304c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.1
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-279.5.2.el6.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.2
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2012-10-14 23:59:08 UTC (1350259148)
Initalizing network drop monitor service
Freeing unused kernel memory: 1260k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 972k freed
Freeing unused kernel memory: 1732k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
dracut: dracut-004-284.el6_3
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
udev: starting version 147
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
  alloc irq_desc for 27 on node -1
  alloc kstat_irqs on node -1
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
IBM TrackPoint firmware: 0x0e, buttons: 3/3
[drm] initialized overlay support
fbcon: inteldrmfb (fb0) is primary device
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
Slow work thread pool: Starting up
Slow work thread pool: Ready
acpi device:01: registered as cooling_device1
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
dracut: Starting plymouth daemon
Switching to clocksource tsc
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
  alloc irq_desc for 28 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304100 irq 28
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304200 irq 28
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Switching to clocksource hpet
ata1.00: ATA-7: WDC WD800BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
scsi 0:0:0:0: Direct-Access     ATA      WDC WD800BEVS-08 08.0 PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
ata5: port disabled. ignoring.
ata4.00: ATAPI: DVD/CDRW UJDA780, CB01, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM            MATSHITA DVD/CDRW UJDA780 CB01 PQ: 0 ANSI: 5
yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c4]
yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
yenta_cardbus 0000:15:00.0: Socket status: 30000006
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x4000-0x7fff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf8300000-0xfbffffff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0xf4000000-0xf7ffffff 64bit pref]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x0000-0x0cf7]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [io  0x0d00-0xffff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000a0000-0x000bffff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d4000-0x000d7fff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000d8000-0x000dbfff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x000dc000-0x000dffff]
yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0xfebfffff]
sd 0:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
dracut: Scanning devices sda2  for LVM logical volumes VolGroup/lv_swap VolGroup/lv_root
dracut: inactive '/dev/VolGroup/lv_root' [35.83 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_home' [37.24 GiB] inherit
dracut: inactive '/dev/VolGroup/lv_swap' [992.00 MiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/VolGroup-lv_root
dracut: Loading SELinux policy
SELinux: 2048 avtab hash slots, 251092 rules.
SELinux: 2048 avtab hash slots, 251092 rules.
SELinux:  9 users, 12 roles, 3761 types, 187 bools, 1 sens, 1024 cats
SELinux:  81 classes, 251092 rules
SELinux:  Completing initialization.
SELinux:  Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1350259152.753:2): policy loaded auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
snd_hda_intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
  alloc irq_desc for 29 on node -1
  alloc kstat_irqs on node -1
snd_hda_intel 0000:00:1b.0: irq 29 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
hda_codec: CX20549 (Venice): BIOS auto-probing.
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
tg3.c:v3.122 (December 7, 2011)
tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95751) rev b002] (PCI Express) MAC address 00:1c:25:91:a4:1f
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:04:00.0: eth0: RXcsums[0] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07rh
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
  alloc irq_desc for 23 on node -1
  alloc kstat_irqs on node -1
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
thinkpad_acpi: ThinkPad ACPI Extras v0.23
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7PETC3WW (2.23 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad R61e, model 76493VJ
thinkpad_acpi: ACPI backlight control delay disabled
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 1015800k swap on /dev/mapper/VolGroup-lv_swap.  Priority:-1 extents:1 across:1015800k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (3852 buckets, 15408 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
  alloc irq_desc for 30 on node -1
  alloc kstat_irqs on node -1
tg3 0000:04:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
tun0: Disabled Privacy Extensions
eth0: no IPv6 routers present

maillog (2013年1月号)

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/2/17 0:14
maillogから

Jan 23 08:45:51 fukuchan sm-mta[47148]: r0MNjnTh047148: ruleset=check_rcpt, arg1=<antispamcontrol@freemailhost.ru>, relay=[46.138.149.82], reject=550 5.7.1 <antispamcontrol@freemailhost.ru>... Relaying denied. IP name lookup failed [46.138.149.82]
Jan 23 08:45:51 fukuchan sm-mta[47148]: r0MNjnTh047148: from=<smtp2001soho@yahoo.com>, size=0, class=0, nrcpts=0, proto=SMTP, daemon=IPv4, relay=[46.138.149.82]

前回のmaillogはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=119
不定期刊行。
Webサーバのログから、各Windows(8、7、Vista、XP)のバージョンの使用率が、どれくらいの割合・シェアか、調査する件であります。

バージョン実測値(行)比率(%)
Windows XP141446.06
Windows Vista1675.44
Windows 7145947.52
Windows 8300.98
※ 調査対象期間:2012/12/06~2013/01/02

まだまだまだ少ないですが、早くもWindows 8 のお目見えです。
それと、Windows 7 が、Windows XP を追い越しました。
うちのサイトは、企業・法人からのアクセスが意外と多いと思われるのですが、
企業ベースでも、Windows 7 の導入が着々と進んでいる様です。
とは言うものの、後1年ちょいで、XP が無くなるとは思えないペースなので、
EOLになっても、XPはしばらく使い続けられるんでしょうね。うぅ~ん。

ちなみに、前回のデータはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=99

MacBook Airを購入した件

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/1/27 0:28
Mac未経験の私が、なぜかMacを購入する事態に。
購入したのは、SSDが128GB、ディスプレイが13.3インチで、
OS X 10.8(Mountain Lion)の物です。

なぜこんな事になったかと言うと、周りでMacを使っている人が少なくなく、
新規ユーザの登録とか、ソフトのインストールとか、トラブル対応やらで、
Macに対応しなきゃならない場面が出てきまして。
んで、「わし、Mac知らんへん」とも言ってられなくなった次第。

ちなみに、Macをまともに使うのは、生まれて初めてです。

で、ファーストインプレッションですが。
何が凄いって、立ち上がりの速さ!
電源を入れてからパスワード入力画面までの時間・・・・・・・・・・10秒
そこから、パスワードを入力してから使える様になるまでの時間・・・2秒

あまりの速さに、最初、唖然としましたよ。
Windows 7が載ってる普通のデスクトップPCなら、1分はかかります。
まぁ、SSDっていうのが、一番、利いているんでしょうけど。

もちろん、シャットダウンも速いです。ほんとに速い時は1秒くらいで電源が切れてくれます。

ただ、トラックパッドの使い方には、えれぇ悩んだりしました。
「ボタンがないな? どこ、押すんだろ?」 ← 1時間、悩んだ。バカ。パッド自体がボタンだよ。

某アニメで、長門さんが、マウスを空中でクルクルしてましたが、
Windows使いが、初めてMacを使うと、あんな感じになりますネ。いや、マジで。

パッドの上で、1本指から4本指まで駆使する使い方なんて、目から鱗です。

電卓や天気予報がサクッと表示出来たり、仮想画面の切り替えが瞬時に出来たりして、
ユーザのニーズをよくつかんでいると思います。
いや、この機能、ほんとに便利です。

端末経由でサーバにアクセスしておかないといけない場面があるのですが、常時接続させておくと
何かの拍子に誤った操作をしてしまったり、誰かが触っておかしくしたりなんて事もないとも限らないので、
他の画面に端末ソフトだけを動かしておくのって、安心なんですよ。(と言っても、まだ会社で使っていませんが)

「端末ソフトを使う時だけ起動すればいいじゃん」っていう話もありますが、アラートが上がったら、
すぐに対応しないといけない状況があるので、常時、立ち上げておくっていうのが理想なんです。

あと、全体的にオシャレで洗練されてますね。WindowsPCみたいに、ダサくないです。
細かい所にも気が配ってあって、使うたびに関心します。

そう言えば、初代Macからフロッピーディスクがオートイジェクトでしたね。
当時は、憧れたものです。(歳がばれる・・・)

ワクチンソフトとかOfficeとか買ってないので、まだ本格的に使えないんですが、
Windowsにはない、ワクワクとドキドキがあります。

maillog (2012年12月号)

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/1/13 2:15
Dec 12 03:29:18 fukuchan sm-mta[26079]: qBBITCbt026079: ruleset=check_rcpt, arg1=<iariopoint@gmail.com>, relay=static.107.149.9.5.clients.your-server.de [5.9.149.107], reject=550 5.7.1 <iariopoint@gmail.com>... Relaying denied. Proper authentication required.
Dec 12 09:56:51 fukuchan sm-mta[28066]: qBC0unXd028066: ruleset=check_rcpt, arg1=<iariopoint@gmail.com>, relay=static.107.149.9.5.clients.your-server.de [5.9.149.107], reject=550 5.7.1 <iariopoint@gmail.com>... Relaying denied. Proper authentication required.

細々とはいえ、相変わらず、アタックがありますね。
10年前ならともかく、今時、オープンリレーとか、おるんかいな?


前回のmaillogはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=112
なんか最近のラノベみたいなタイトルですが・・・。

http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=109 にもカキコしましたが、
FreeBSDのportsも、/usr/ports/lang/php5が、5.4系に変わりました。
新規にサーバを立ち上げる時は良いですが、既存のサーバで、PHPを5.3系で運営してきた場合、
PHPをアップデートすると、5.4系に変わってしまう可能性が・・・。

そうなると、依存portsにも影響がありますし、何より、上のレイヤーで動いているアプリケーションにも、
色々と問題が出てきます。(あっ、動かない・・・どうしよう。とか)

家の場合、xoopsが動いていますので、しばらくは5.3系を使っていたい訳でして。

って事で、
「FreeBSDで、PHPのバージョンを5.4系に上げずに、5.3系に留まりたいんだけど、どうしたらえぇですか?」的な、
無知の知なる黙示録の始まりー。

※ 下記の内容は、現在の私のスキルや環境に依存したものですので、参考程度に留めて下さい。苦情はよそへ。


まずは、portsのphp5のオリジン(って言うのか?)を、lang/php53に変更します。
私の場合、PHPのセキュリティアップデートが発生したタイミングで行いました。
アップデートに使用しているツールは、portmasterです。(portupgradeな人は、他のサイトを見て下され)

# portmaster -w -D -o lang/php53 lang/php5

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                     Options for php53 5.3.15                       x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x [ ] AP2FILTER  Use Apache 2.x filter interface (experimental)  x x
x x [X] APACHE     Build Apache module                             x x
    ↑ 付ける。環境に合わせて下さい。
x x [X] CGI        Build CGI version                               x x
x x [X] CLI        Build CLI version                               x x
x x [ ] DEBUG      Install debug symbols                           x x
x x [ ] FPM        Build FPM version (experimental)                x x
x x [X] IPV6       IPv6 support                                    x x
x x [ ] LINKTHR    Link thread lib (for threaded extensions)       x x
x x [ ] MAILHEAD   mail header patch                               x x
x x [X] MULTIBYTE  zend multibyte support                          x x
    ↑ 付ける。環境に合わせて下さい。
x x [X] SUHOSIN    Suhosin protection system                       x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

===>>> The following actions will be taken if you choose to proceed:
        Install lang/php53
        Install devel/pkgconf

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
===> SECURITY REPORT:
      This port has installed the following files which may act as network
      servers and may therefore pose a remote security risk to the system.
/usr/local/libexec/apache22/libphp5.so
/usr/local/bin/php
/usr/local/bin/php-cgi

      If there are vulnerabilities in these programs there may be a security
      risk to the system. FreeBSD makes no guarantee about the security of
      ports included in the Ports Collection. Please type 'make deinstall'
      to deinstall the port if this is a concern.

      For more information, and contact details about the security
      status of this software, see the following webpage:
http://www.php.net/

===>  Cleaning for php53-5.3.15

===>>> Updating dependency entry for php53-5.3.15 in each dependent port
===>>> pkg-message for php53-5.3.15
***************************************************************

Make sure index.php is part of your DirectoryIndex.

You should add the following to your Apache configuration file:

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

***************************************************************

===>>> Done displaying pkg-message files

===>>> The following actions were performed:
        Installation of devel/pkgconf (pkgconf-0.8.5)
        Installation of lang/php53 (php53-5.3.15)

portmaster -L の結果を確認してみます。
# portmaster -L

===>>> Branch ports (Have dependencies, are depended on)
===>>> php53-5.3.1
(一部を抜粋)

/usr/local/etc/ 下の、php関連の設定を確認・修正します。
php.ini-production に、細かい修正がありましたが、コメント部分なので、今回は無視する事にしました。
皆さんも適宜、調整して下さい。

次に、PHP に依存するものを、アップデートします。
下記の方法で、一つずつ、PHP に依存するものをアップデートしていきます。。
いや、もっと要領のよい方法があるんでしょうけど、一度にやると、大抵、トラブルに巻き込まれる体質なので、
一つずつ、確実に行っていきました。

皆さんの環境でも、php5-hogehogeな物を、php53-hogehogeにして下さい。

# portmaster -w -D -o archivers/php53-bz2 archivers/php5-bz2
# portmaster -w -D -o textproc/php53-ctype textproc/php5-ctype
# portmaster -w -D -o security/php53-filter security/php5-filter
# portmaster -w -D -o graphics/php53-gd graphics/php5-gd

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                   Options for php53-gd 5.3.15                      x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x         [ ] JIS       JIS-mapped Japanese font support         x x
x x         [X] T1LIB     Include T1lib support                    x x
x x         [X] TRUETYPE  TrueType string function                 x x
x x         [X] X11       X11 support                              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                      Options for png 1.5.12                        x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x                 [X] APNG  Animated PNG support                 x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

===>>> The following actions will be taken if you choose to proceed:
        Install graphics/php53-gd
        Upgrade png-1.4.11 to png-1.5.12
        Install devel/cmake
        Install devel/cmake-modules

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
pkg_delete: package 'php5-gd-5.3.13' is required by these other packages
and may not be deinstalled (but I'll delete it anyway):
pecl-pdflib-2.1.8_1
phpMyAdmin-3.5.1

===>>> Starting check for runtime dependencies
===>>> Gathering dependency list for graphics/php53-gd from ports
===>>> Dependency check complete for graphics/php53-gd
===>  Installing for php53-gd-5.3.15
===>   Generating temporary packing list
===>  Checking if graphics/php53-gd already installed
===>   Registering installation for php53-gd-5.3.15
****************************************************************************

The following line has been added to your /usr/local/etc/php/extensions.ini
configuration file to automatically load the installed extension:

extension=gd.so

****************************************************************************

===>  Cleaning for php53-gd-5.3.15

===>>> Updating dependency entry for php53-gd-5.3.15 in each dependent port
===>>> The following actions were performed:
        Installation of devel/cmake-modules (cmake-modules-2.8.8)
        Installation of devel/cmake (cmake-2.8.8_1)
        Upgrade of png-1.4.11 to png-1.5.12
        Installation of graphics/php53-gd (php53-gd-5.3.15)

頑張りましょう。

# portmaster -w -D -o devel/php53-json devel/php5-json
# portmaster -w -D -o converters/php53-mbstring converters/php5-mbstring

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                Options for php53-mbstring 5.3.15                   x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x               [X] REGEX  multibyte regex support               x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
# portmaster -w -D -o security/php53-mcrypt security/php5-mcrypt
# portmaster -w -D -o databases/php53-mysqli databases/php5-mysqli

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                 Options for php53-mysqli 5.3.15                    x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x             [X] MYSQLND  Use MySQL Native Driver"              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
# portmaster -w -D -o security/php53-openssl security/php5-openssl
# portmaster -w -D -o www/php53-session www/php5-session
# portmaster -w -D -o archivers/php53-zip archivers/php5-zip
# portmaster -w -D -o archivers/php53-zlib archivers/php5-zlib

ここで、依存関係を確認してみます。
# pkg_info -R php53-5.3.15

Information for php53-5.3.15:

Required by:
pecl-APC-3.1.9_1
pecl-pdflib-2.1.8_1
php5-mysql-5.3.13
phpMyAdmin-3.5.1
php53-bz2-5.3.15
php53-ctype-5.3.15
php53-filter-5.3.15
php53-gd-5.3.15
php53-json-5.3.15
php53-mbstring-5.3.15
php53-mcrypt-5.3.15
php53-mysqli-5.3.15
php53-openssl-5.3.15
php53-session-5.3.15
php53-zip-5.3.15
php53-zlib-5.3.15

残りも頑張りましょう。

portmaster -w -D -o databases/php53-mysql databases/php5-mysql

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                  Options for php53-mysql 5.3.15                    x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x             [X] MYSQLND  Use MySQL Native Driver"              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
portmaster -w -D www/pecl-APC

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                   Options for pecl-APC 3.1.11                      x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x    [ ] FILEHITS    Per request cache info                      x x
x x    [ ] IPC         IPC shm memory support (default: mmap)      x x
x x    [ ] SEMAPHORES  System V IPC semaphores (default: fcntl)    x x
x x    [ ] SPINLOCKS   Spinlocks (experimental)                    x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu


****************************************************************************

===>  Cleaning for pecl-APC-3.1.11

===>>> Updating dependency entry for pecl-APC-3.1.11 in each dependent port
===>>> pkg-message for pecl-APC-3.1.11
************************************************************************
You may edit /usr/local/etc/php.ini to change this variables:

apc.enabled="1"
            ^^^ -> Default value

apc.shm_size="30"
             ^^^^ -> Default value

* More information on /usr/local/share/doc/APC/INSTALL

Then restart your web server and consult the output of phpinfo().
If there is an informational section for APC, the installation was
successful.
************************************************************************
portmaster -w -D print/pecl-pdflib

===>>> The following actions will be taken if you choose to proceed:
        Upgrade pecl-pdflib-2.1.8_1 to pecl-pdflib-2.1.9
        Upgrade pdflib-7.0.5 to pdflib-7.0.5_2

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
===>>> Updating dependency entry for pecl-pdflib-2.1.9 in each dependent port
===>>> The following actions were performed:
        Upgrade of pdflib-7.0.5 to pdflib-7.0.5_2
        Upgrade of pecl-pdflib-2.1.8_1 to pecl-pdflib-2.1.9

この後、phpMyAdmin のアップデートもあるのですが、ここでは割愛させて頂きます。

アプリの動作確認をして終わりです。
お疲れ様でした。
ブログ カレンダー
« « 2017 12月 » »
26 27 28 29 30 1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31 1 2 3 4 5 6
カテゴリ一覧
検索
D.S. -Dal Segno-
D.S. -Dal Segno-
リプキス
甘えかたは彼女なりに。
恋する乙女と守護の楯~薔薇の聖母~
AXL新作第12弾「恋する乙女と守護の楯~薔薇の聖母~」 2016年1月29日発売予定!
Powered by XOOPS Cube Legacy 2.2 © 2001-2009 XOOPS Cube日本サイト