Welcome Guest 
メインメニュー
ご注文はうさぎですか?
TVアニメ「ご注文はうさぎですか?」公式サイト
アイドルマスター シンデレラガールズ
TVアニメ「アイドルマスター シンデレラガールズ」オフィシャルサイト
俺がお嬢様学校に「庶民サンプル」としてゲッツされた件
TVアニメ『俺がお嬢様学校に「庶民サンプル」としてゲッツされた件』公式サイト
ゆるゆり
アニメ「ゆるゆり」スペシャルサイト
落第騎士の英雄譚
TVアニメ 落第騎士の英雄譚 公式サイト
てーきゅう
TVアニメ「てーきゅう」
Free!-Eternal Summer-
TVアニメ『Free!』公式サイト
星刻の竜騎士
TVアニメーション「星刻の竜騎士」オフィシャルサイト
中二病でも恋がしたい!戀
TVアニメ『中二病でも恋がしたい!戀』公式サイト
そにアニ
そにアニ
境界の彼方
TVアニメ『境界の彼方』公式サイト
通信用語の基礎知識
通信用語の基礎知識

ブログ - 最新エントリー

maillog (2013年1月号)

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/2/17 0:14
maillogから

Jan 23 08:45:51 fukuchan sm-mta[47148]: r0MNjnTh047148: ruleset=check_rcpt, arg1=<antispamcontrol@freemailhost.ru>, relay=[46.138.149.82], reject=550 5.7.1 <antispamcontrol@freemailhost.ru>... Relaying denied. IP name lookup failed [46.138.149.82]
Jan 23 08:45:51 fukuchan sm-mta[47148]: r0MNjnTh047148: from=<smtp2001soho@yahoo.com>, size=0, class=0, nrcpts=0, proto=SMTP, daemon=IPv4, relay=[46.138.149.82]

前回のmaillogはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=119
不定期刊行。
Webサーバのログから、各Windows(8、7、Vista、XP)のバージョンの使用率が、どれくらいの割合・シェアか、調査する件であります。

バージョン実測値(行)比率(%)
Windows XP141446.06
Windows Vista1675.44
Windows 7145947.52
Windows 8300.98
※ 調査対象期間:2012/12/06~2013/01/02

まだまだまだ少ないですが、早くもWindows 8 のお目見えです。
それと、Windows 7 が、Windows XP を追い越しました。
うちのサイトは、企業・法人からのアクセスが意外と多いと思われるのですが、
企業ベースでも、Windows 7 の導入が着々と進んでいる様です。
とは言うものの、後1年ちょいで、XP が無くなるとは思えないペースなので、
EOLになっても、XPはしばらく使い続けられるんでしょうね。うぅ~ん。

ちなみに、前回のデータはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=99

MacBook Airを購入した件

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/1/27 0:28
Mac未経験の私が、なぜかMacを購入する事態に。
購入したのは、SSDが128GB、ディスプレイが13.3インチで、
OS X 10.8(Mountain Lion)の物です。

なぜこんな事になったかと言うと、周りでMacを使っている人が少なくなく、
新規ユーザの登録とか、ソフトのインストールとか、トラブル対応やらで、
Macに対応しなきゃならない場面が出てきまして。
んで、「わし、Mac知らんへん」とも言ってられなくなった次第。

ちなみに、Macをまともに使うのは、生まれて初めてです。

で、ファーストインプレッションですが。
何が凄いって、立ち上がりの速さ!
電源を入れてからパスワード入力画面までの時間・・・・・・・・・・10秒
そこから、パスワードを入力してから使える様になるまでの時間・・・2秒

あまりの速さに、最初、唖然としましたよ。
Windows 7が載ってる普通のデスクトップPCなら、1分はかかります。
まぁ、SSDっていうのが、一番、利いているんでしょうけど。

もちろん、シャットダウンも速いです。ほんとに速い時は1秒くらいで電源が切れてくれます。

ただ、トラックパッドの使い方には、えれぇ悩んだりしました。
「ボタンがないな? どこ、押すんだろ?」 ← 1時間、悩んだ。バカ。パッド自体がボタンだよ。

某アニメで、長門さんが、マウスを空中でクルクルしてましたが、
Windows使いが、初めてMacを使うと、あんな感じになりますネ。いや、マジで。

パッドの上で、1本指から4本指まで駆使する使い方なんて、目から鱗です。

電卓や天気予報がサクッと表示出来たり、仮想画面の切り替えが瞬時に出来たりして、
ユーザのニーズをよくつかんでいると思います。
いや、この機能、ほんとに便利です。

端末経由でサーバにアクセスしておかないといけない場面があるのですが、常時接続させておくと
何かの拍子に誤った操作をしてしまったり、誰かが触っておかしくしたりなんて事もないとも限らないので、
他の画面に端末ソフトだけを動かしておくのって、安心なんですよ。(と言っても、まだ会社で使っていませんが)

「端末ソフトを使う時だけ起動すればいいじゃん」っていう話もありますが、アラートが上がったら、
すぐに対応しないといけない状況があるので、常時、立ち上げておくっていうのが理想なんです。

あと、全体的にオシャレで洗練されてますね。WindowsPCみたいに、ダサくないです。
細かい所にも気が配ってあって、使うたびに関心します。

そう言えば、初代Macからフロッピーディスクがオートイジェクトでしたね。
当時は、憧れたものです。(歳がばれる・・・)

ワクチンソフトとかOfficeとか買ってないので、まだ本格的に使えないんですが、
Windowsにはない、ワクワクとドキドキがあります。

maillog (2012年12月号)

カテゴリ : 
ICT、コンピュータ
執筆 : 
Fukuchan 2013/1/13 2:15
Dec 12 03:29:18 fukuchan sm-mta[26079]: qBBITCbt026079: ruleset=check_rcpt, arg1=<iariopoint@gmail.com>, relay=static.107.149.9.5.clients.your-server.de [5.9.149.107], reject=550 5.7.1 <iariopoint@gmail.com>... Relaying denied. Proper authentication required.
Dec 12 09:56:51 fukuchan sm-mta[28066]: qBC0unXd028066: ruleset=check_rcpt, arg1=<iariopoint@gmail.com>, relay=static.107.149.9.5.clients.your-server.de [5.9.149.107], reject=550 5.7.1 <iariopoint@gmail.com>... Relaying denied. Proper authentication required.

細々とはいえ、相変わらず、アタックがありますね。
10年前ならともかく、今時、オープンリレーとか、おるんかいな?


前回のmaillogはこちらです。
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=112
なんか最近のラノベみたいなタイトルですが・・・。

http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=109 にもカキコしましたが、
FreeBSDのportsも、/usr/ports/lang/php5が、5.4系に変わりました。
新規にサーバを立ち上げる時は良いですが、既存のサーバで、PHPを5.3系で運営してきた場合、
PHPをアップデートすると、5.4系に変わってしまう可能性が・・・。

そうなると、依存portsにも影響がありますし、何より、上のレイヤーで動いているアプリケーションにも、
色々と問題が出てきます。(あっ、動かない・・・どうしよう。とか)

家の場合、xoopsが動いていますので、しばらくは5.3系を使っていたい訳でして。

って事で、
「FreeBSDで、PHPのバージョンを5.4系に上げずに、5.3系に留まりたいんだけど、どうしたらえぇですか?」的な、
無知の知なる黙示録の始まりー。

※ 下記の内容は、現在の私のスキルや環境に依存したものですので、参考程度に留めて下さい。苦情はよそへ。


まずは、portsのphp5のオリジン(って言うのか?)を、lang/php53に変更します。
私の場合、PHPのセキュリティアップデートが発生したタイミングで行いました。
アップデートに使用しているツールは、portmasterです。(portupgradeな人は、他のサイトを見て下され)

# portmaster -w -D -o lang/php53 lang/php5

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                     Options for php53 5.3.15                       x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x [ ] AP2FILTER  Use Apache 2.x filter interface (experimental)  x x
x x [X] APACHE     Build Apache module                             x x
    ↑ 付ける。環境に合わせて下さい。
x x [X] CGI        Build CGI version                               x x
x x [X] CLI        Build CLI version                               x x
x x [ ] DEBUG      Install debug symbols                           x x
x x [ ] FPM        Build FPM version (experimental)                x x
x x [X] IPV6       IPv6 support                                    x x
x x [ ] LINKTHR    Link thread lib (for threaded extensions)       x x
x x [ ] MAILHEAD   mail header patch                               x x
x x [X] MULTIBYTE  zend multibyte support                          x x
    ↑ 付ける。環境に合わせて下さい。
x x [X] SUHOSIN    Suhosin protection system                       x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

===>>> The following actions will be taken if you choose to proceed:
        Install lang/php53
        Install devel/pkgconf

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
===> SECURITY REPORT:
      This port has installed the following files which may act as network
      servers and may therefore pose a remote security risk to the system.
/usr/local/libexec/apache22/libphp5.so
/usr/local/bin/php
/usr/local/bin/php-cgi

      If there are vulnerabilities in these programs there may be a security
      risk to the system. FreeBSD makes no guarantee about the security of
      ports included in the Ports Collection. Please type 'make deinstall'
      to deinstall the port if this is a concern.

      For more information, and contact details about the security
      status of this software, see the following webpage:
http://www.php.net/

===>  Cleaning for php53-5.3.15

===>>> Updating dependency entry for php53-5.3.15 in each dependent port
===>>> pkg-message for php53-5.3.15
***************************************************************

Make sure index.php is part of your DirectoryIndex.

You should add the following to your Apache configuration file:

AddType application/x-httpd-php .php
AddType application/x-httpd-php-source .phps

***************************************************************

===>>> Done displaying pkg-message files

===>>> The following actions were performed:
        Installation of devel/pkgconf (pkgconf-0.8.5)
        Installation of lang/php53 (php53-5.3.15)

portmaster -L の結果を確認してみます。
# portmaster -L

===>>> Branch ports (Have dependencies, are depended on)
===>>> php53-5.3.1
(一部を抜粋)

/usr/local/etc/ 下の、php関連の設定を確認・修正します。
php.ini-production に、細かい修正がありましたが、コメント部分なので、今回は無視する事にしました。
皆さんも適宜、調整して下さい。

次に、PHP に依存するものを、アップデートします。
下記の方法で、一つずつ、PHP に依存するものをアップデートしていきます。。
いや、もっと要領のよい方法があるんでしょうけど、一度にやると、大抵、トラブルに巻き込まれる体質なので、
一つずつ、確実に行っていきました。

皆さんの環境でも、php5-hogehogeな物を、php53-hogehogeにして下さい。

# portmaster -w -D -o archivers/php53-bz2 archivers/php5-bz2
# portmaster -w -D -o textproc/php53-ctype textproc/php5-ctype
# portmaster -w -D -o security/php53-filter security/php5-filter
# portmaster -w -D -o graphics/php53-gd graphics/php5-gd

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                   Options for php53-gd 5.3.15                      x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x         [ ] JIS       JIS-mapped Japanese font support         x x
x x         [X] T1LIB     Include T1lib support                    x x
x x         [X] TRUETYPE  TrueType string function                 x x
x x         [X] X11       X11 support                              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                      Options for png 1.5.12                        x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x                 [X] APNG  Animated PNG support                 x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu

===>>> The following actions will be taken if you choose to proceed:
        Install graphics/php53-gd
        Upgrade png-1.4.11 to png-1.5.12
        Install devel/cmake
        Install devel/cmake-modules

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
pkg_delete: package 'php5-gd-5.3.13' is required by these other packages
and may not be deinstalled (but I'll delete it anyway):
pecl-pdflib-2.1.8_1
phpMyAdmin-3.5.1

===>>> Starting check for runtime dependencies
===>>> Gathering dependency list for graphics/php53-gd from ports
===>>> Dependency check complete for graphics/php53-gd
===>  Installing for php53-gd-5.3.15
===>   Generating temporary packing list
===>  Checking if graphics/php53-gd already installed
===>   Registering installation for php53-gd-5.3.15
****************************************************************************

The following line has been added to your /usr/local/etc/php/extensions.ini
configuration file to automatically load the installed extension:

extension=gd.so

****************************************************************************

===>  Cleaning for php53-gd-5.3.15

===>>> Updating dependency entry for php53-gd-5.3.15 in each dependent port
===>>> The following actions were performed:
        Installation of devel/cmake-modules (cmake-modules-2.8.8)
        Installation of devel/cmake (cmake-2.8.8_1)
        Upgrade of png-1.4.11 to png-1.5.12
        Installation of graphics/php53-gd (php53-gd-5.3.15)

頑張りましょう。

# portmaster -w -D -o devel/php53-json devel/php5-json
# portmaster -w -D -o converters/php53-mbstring converters/php5-mbstring

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                Options for php53-mbstring 5.3.15                   x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x               [X] REGEX  multibyte regex support               x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
# portmaster -w -D -o security/php53-mcrypt security/php5-mcrypt
# portmaster -w -D -o databases/php53-mysqli databases/php5-mysqli

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                 Options for php53-mysqli 5.3.15                    x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x             [X] MYSQLND  Use MySQL Native Driver"              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
# portmaster -w -D -o security/php53-openssl security/php5-openssl
# portmaster -w -D -o www/php53-session www/php5-session
# portmaster -w -D -o archivers/php53-zip archivers/php5-zip
# portmaster -w -D -o archivers/php53-zlib archivers/php5-zlib

ここで、依存関係を確認してみます。
# pkg_info -R php53-5.3.15

Information for php53-5.3.15:

Required by:
pecl-APC-3.1.9_1
pecl-pdflib-2.1.8_1
php5-mysql-5.3.13
phpMyAdmin-3.5.1
php53-bz2-5.3.15
php53-ctype-5.3.15
php53-filter-5.3.15
php53-gd-5.3.15
php53-json-5.3.15
php53-mbstring-5.3.15
php53-mcrypt-5.3.15
php53-mysqli-5.3.15
php53-openssl-5.3.15
php53-session-5.3.15
php53-zip-5.3.15
php53-zlib-5.3.15

残りも頑張りましょう。

portmaster -w -D -o databases/php53-mysql databases/php5-mysql

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                  Options for php53-mysql 5.3.15                    x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x             [X] MYSQLND  Use MySQL Native Driver"              x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu
portmaster -w -D www/pecl-APC

lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk
x                   Options for pecl-APC 3.1.11                      x
x lqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqk x
x x    [ ] FILEHITS    Per request cache info                      x x
x x    [ ] IPC         IPC shm memory support (default: mmap)      x x
x x    [ ] SEMAPHORES  System V IPC semaphores (default: fcntl)    x x
x x    [ ] SPINLOCKS   Spinlocks (experimental)                    x x
x x                                                                x x
tqmqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqjqu


****************************************************************************

===>  Cleaning for pecl-APC-3.1.11

===>>> Updating dependency entry for pecl-APC-3.1.11 in each dependent port
===>>> pkg-message for pecl-APC-3.1.11
************************************************************************
You may edit /usr/local/etc/php.ini to change this variables:

apc.enabled="1"
            ^^^ -> Default value

apc.shm_size="30"
             ^^^^ -> Default value

* More information on /usr/local/share/doc/APC/INSTALL

Then restart your web server and consult the output of phpinfo().
If there is an informational section for APC, the installation was
successful.
************************************************************************
portmaster -w -D print/pecl-pdflib

===>>> The following actions will be taken if you choose to proceed:
        Upgrade pecl-pdflib-2.1.8_1 to pecl-pdflib-2.1.9
        Upgrade pdflib-7.0.5 to pdflib-7.0.5_2

===>>> Proceed? y/n [y] y
  |
 (続く)
  |
===>>> Updating dependency entry for pecl-pdflib-2.1.9 in each dependent port
===>>> The following actions were performed:
        Upgrade of pdflib-7.0.5 to pdflib-7.0.5_2
        Upgrade of pecl-pdflib-2.1.8_1 to pecl-pdflib-2.1.9

この後、phpMyAdmin のアップデートもあるのですが、ここでは割愛させて頂きます。

アプリの動作確認をして終わりです。
お疲れ様でした。
ちょっと前の話になりますが、
「最新のエントリ」と「最新のコメント」の表示数を、5個から10個に変えました。
長く表示されて、バランスが少し改善されたかな?
もっと多くてもいいかな。
つい最近、知りました。
どの系統に乗っても良いって事。

もう8年も前に、変わっていたとは。
長い間、バス通勤に定期を使っていなかったので、浦島太郎な気分です。

あぁ「ダメじゃん」って言わないで・・・。
最近、ADSL回線が切れる事が多くなりました。
なんせ、使っている最中に切れて再接続しにいくので、その度に、作業が中断されます。
遊びにしか使ってないので、実害はあまりありませんが、自宅サーバのIPアドレスも、
その度に変わるでしょうから、少々、穏やかではありません。

天気のよい日にも発生するので、雨の影響ではなさそう。
まともにログがとれるルータならいいんだけど、そうじゃないから、こちらでは、ほとんど打つ手がなし。
ちなみに、これは、プロバイダのレンタル物です。

半日ほどモデムの電源を停止して再接続したら、状況が好転した感じ。
接続先のネットワークのセグメントが変わったので、それが良かったのかも。
って事は、アクセスポイントに、調子の悪いモデムが居たのかな?
Linuxを使う機会があったので報告します。
CentOS release 5.3をインストールした後に、yumで5.8までアップグレードしました。
dmesgを晒しておきます。
参考までに。

Linux version 2.6.18-308.8.2.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)) #1 SMP Tue Jun 12 09:57:26 EDT 2012
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000010000 - 000000000009d800 (usable)
 BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001f6d0000 (usable)
 BIOS-e820: 000000001f6d0000 - 000000001f6de000 (ACPI data)
 BIOS-e820: 000000001f6de000 - 000000001f700000 (ACPI NVS)
 BIOS-e820: 000000001f700000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
 BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
502MB LOWMEM available.
found SMP MP-table at 000f6ad0
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 128720
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 124624 pages, LIFO batch:31
DMI present.
DMI: LENOVO 76493VJ/76493VJ, BIOS 7PETC3WW (2.23 ) 04/12/2010
Using APIC driver default
ACPI: RSDP (v002 LENOVO                                ) @ 0x000f6aa0
ACPI: XSDT (v001 LENOVO TP-7P    0x00002230  LTP 0x00000000) @ 0x1f6d2f3c
ACPI: FADT (v003 LENOVO TP-7P    0x00002230 LNVO 0x00000001) @ 0x1f6d3000
ACPI: SSDT (v001 LENOVO TP-7P    0x00002230 MSFT 0x03000000) @ 0x1f6d31b4
ACPI: ECDT (v001 LENOVO TP-7P    0x00002230 LNVO 0x00000001) @ 0x1f6ddbe5
ACPI: MADT (v001 LENOVO TP-7P    0x00002230 LNVO 0x00000001) @ 0x1f6ddc37
ACPI: MCFG (v001 LENOVO TP-7P    0x00002230 LNVO 0x00000001) @ 0x1f6ddc9f
ACPI: HPET (v001 LENOVO TP-7P    0x00002230 LNVO 0x00000001) @ 0x1f6ddcdb
ACPI: SLIC (v001 LENOVO TP-7P    0x00002230  LTP 0x00000000) @ 0x1f6dde62
ACPI: BOOT (v001 LENOVO TP-7P    0x00002230  LTP 0x00000001) @ 0x1f6ddfd8
ACPI: SSDT (v001 LENOVO TP-7P    0x00002230 INTL 0x20050513) @ 0x1f6e2a6a
ACPI: SSDT (v001 LENOVO TP-7P    0x00002230 INTL 0x20050513) @ 0x1f6e32c8
ACPI: SSDT (v001 LENOVO TP-7P    0x00002230 INTL 0x20050513) @ 0x1f6e3527
ACPI: SSDT (v001 LENOVO TP-7P    0x00002230 INTL 0x20050513) @ 0x1f6e3a1e
ACPI: DSDT (v001 LENOVO TP-7P    0x00002230 MSFT 0x03000000) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:6 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 20000000:d0000000)
Detected 1862.128 MHz processor.
Built 1 zonelists.  Total pages: 128720
Kernel command line: ro root=/dev/VolGroup00/LogVol00
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0773000 soft=c0753000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 501756k/514880k available (2208k kernel code, 12428k reserved, 918k data, 232k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
hpet0: at MMIO 0xfed00000 (virtual 0xe0000000), IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
Using HPET for base-timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.25 BogoMIPS (lpj=1862128)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
CPU: After vendor identify, caps: afebfbff 20100000 00000000 00000000 0000e31d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afebf3ff 20100000 00000000 00000940 0000e31d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 14k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Celeron(R) CPU          540  @ 1.86GHz stepping 01
Total of 1 processors activated (3724.25 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Using local APIC timer interrupts.
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=176 bytes
checking if image is initramfs... it is
Freeing initrd memory: 3354k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG
Setting up standard PCI resources
ACPI: Found ECDT
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 18) interrupt mode.
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 10 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
pnp: 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
pnp: 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
pnp: 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
PCI: Bridge: 0000:00:1c.0
  IO window: 2000-0000
  MEM window: fc000000-00000000
  PREFETCH window 0x00000000f8000000-0x00000000f80fffff
PCI: Bridge: 0000:00:1c.1
  IO window: 3000-0000
  MEM window: dc000000-00000000
  PREFETCH window 0x00000000dfe00000-0x00000000dfefffff
PCI: Bridge: 0000:00:1c.2
  IO window: disabled.
  MEM window: fe000000-00000000
  PREFETCH window: disabled.
PCI: Bus 22, cardbus bridge: 0000:15:00.0
  IO window: 00004000-00000000
  IO window: 00004400-00000000
  PREFETCH window: f4000000-00000000
  MEM window: fa000000-00000000
PCI: Bridge: 0000:00:1e.0
  IO window: 4000-0000
  MEM window: f8300000-00000000
  PREFETCH window 0x00000000f4000000-0x00000000f7ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.2 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 193
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1341774650.647:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key E6168E16738831F7
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling MSI on Portable Device
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.2 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (39 C)
ACPI: Thermal Zone [THM1] (40 C)
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH8M: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 193
ICH8M: chipset revision 3
ICH8M: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:DMA, hdb:pio
Probing IDE interface ide0...
hda: DVD/CDRW UJDA780, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
Yenta: CardBus bridge found at 0000:15:00.0 [17aa:20c4]
Yenta: ISA IRQ mask 0x04b8, PCI irq 193
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff
pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports<6>Time: hpet clocksource has been installed.
 S0 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 232k freed
Write protecting the kernel read-only data: 417k
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 185, io mem 0xfe304800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 201, io mem 0xfe304c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input1
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 169, io base 0x00001820
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 177, io base 0x00001840
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 193, io base 0x00001860
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 209, io base 0x00001880
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 217, io base 0x000018a0
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 193
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304100 irq 193
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304200 irq 193
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
ata1.00: ATA-7: WDC WD800BEVS-08RST2, 08.01G08, max UDMA/133
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 succeeded
ata1.00: configured for UDMA/133
ata1.00: configured for UDMA/133
ata1: EH complete
ata3: SATA link down (SStatus 0 SControl 300)
  Vendor: ATA       Model: WDC WD800BEVS-08  Rev: 08.0
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
 sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
device-mapper: dm-raid45: initialized v0.2594l
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1341774676.503:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input2
ACPI: PCI Interrupt 0000:00:1f.3[A] -> GSI 23 (level, low) -> IRQ 225
hda: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
tg3.c:v3.119 (May 18, 2011)<6>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:04:00.0 to 64
tg3 0000:04:00.0: eth0: eth0: Tigon3 [partno(BCM95751) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1c:25:91:a4:1f
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 209
hda_intel: probe_mask set to 0x1 for device 17aa:20ac
PCI: Setting latency timer of device 0000:00:1b.0 to 64
sd 0:0:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
work still pending
lp: driver loaded but no devices found
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
thinkpad_acpi: ThinkPad ACPI Extras v0.19
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7PETC3WW (2.23 ), EC 7KHT24WW-1.08
thinkpad_acpi: Lenovo ThinkPad R61e
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: detected a 16-level brightness capable ThinkPad
input: ThinkPad Extra Buttons as /class/input/input3
input: Video Bus as /class/input/input4
ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
input: Video Bus as /class/input/input5
ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.6 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1015800k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1015800k
IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
microcode: CPU0 updated from revision 0x33 to 0x44, date = 10042010
Loading iSCSI transport class v2.0-871.
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.0.3 (Aug 04, 2011)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (4022 buckets, 32176 max) - 228 bytes per conntrack
ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:04:00.0: eth0: Link is up at 100 Mbps, full duplex
tg3 0000:04:00.0: eth0: Flow control is on for TX and on for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth0: no IPv6 routers present


ちなみに、ハードの型番は以下の通りです。
 ThinkPad R61e (7649-3VJ)

しかし、FreeBSDに比べて、dmesgも半端ない長さになりますね。

上の情報をテキストで取得するために、telnetのサービスとxinetdをインストールしてから、
xinetdを有効にし、更に、iptablesのtelnetのポートを開いたりと、なんか、Linuxって面倒っすー。

「えっ? ふつーsshだろ」ってか。
ごめんなさい、ごめんなさい、ごめんなさい。
ビープ音に近い感じですが、かと言って、ビープ音でもない様な微妙な音色です。
どこかで、接触不良でも起こしているのかも知れません。

頻度としては、1回/週くらいでしょうか。
鳴っている時間は、2~3秒ほどです。
ずっーと部屋にいる訳ではないので、もっと頻発しているのかも。

このノートPCは、液晶パネルに縦線が入っている状態なので、それも関係しているのでしょうか?
http://fukuchan.myhome.cx/modules/d3blog/details.php?bid=80

そのうち、火を噴かないかと心配です。
使い始めて、まだ1年経ってないんですけどね。
いや、中古ですから、1年って事はないんですけど。

いくらで買ったっけ? これ。
コストパフォーマンス、悪くね? www
ブログ カレンダー
« « 2017 6月 » »
28 29 30 31 1 2 3
4 5 6 7 8 9 10
11 12 13 14 15 16 17
18 19 20 21 22 23 24
25 26 27 28 29 30 1
カテゴリ一覧
検索
D.S. -Dal Segno-
D.S. -Dal Segno-
リプキス
甘えかたは彼女なりに。
恋する乙女と守護の楯~薔薇の聖母~
AXL新作第12弾「恋する乙女と守護の楯~薔薇の聖母~」 2016年1月29日発売予定!
Powered by XOOPS Cube Legacy 2.2 © 2001-2009 XOOPS Cube日本サイト